Surfboard Wall Hangers


Our surfboards are built to be surfed, but that doesn’t mean that you can’t enjoy them out of the water too.

We’ve designed these unobtrusive wall hangers to match the aesthetic style and curves of our surfboards, crafting them from laminated poplar with a secure, screwed, mortice and tenon joint and cork padding. Designed to fit all of the surfboards in the Otter range, displaying your board horizontally.

Additional information

Weight 1.5 kg
Dimensions 53 × 23 × 8 cm


These are two separate items that can be fixed to a wall with your required gap in between. We normally find that 100cm is a good gap for smaller boards and up to 150cm is good for our longboards.

Fixed to the wall with two screws on each hanger, we suggest ensuring a good, solid fixing into your wall. Wood screws (supplied) if you’re going into studs, use wall plugs if you’re going into a solid wall and use hollow wall fixings if you only have plaster board.

Please make sure that your fixings are stonrg enough to support your surfboard. To be safe, aim for 20Kgs specification for your fixing.

If you specifically need a solution to hang your board vertically on the wall, get in touch. We make them to measure, so need to know what board you have.

Everything we make here starts life in the timber stack outside our workshop, so all our custom products take time to make.

We will do our best to make your item as quickly as we can, but we also know that rushing things almost always ends with poor results.

Our promise to you?

Whatever you order will be worth the wait.